EtherNet interface module. For interfacing up to eight digital non-ATEX load cells via EtherNet/IP.

Type: 2050

Interface: EtherNet/IP

Special features:

• EtherNet/IP communication module for interfacing Eilersen digital load cells to PCs, PLCs and other equipment
• Made in Denmark
• The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell
• The module offers plug-and-play installation with Eilersen pre-calibrated digital load cells
• The module is supplied with an EDS file for easy installation
• Application software can be made by request

Options:

• Customized application software
• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• OEM version

RS485 interface module for interfacing digital load cells to PLCs, PCs etc. The module is developed for OEM use and can be equipped with customized protocols. 

Type: 4140OEM

Interface: RS485

Special features:

• RS485 output
• Made in Denmark
• Weighing module with connector for 1 digital load cell
• Plug-and-play installation with pre-calibrated digital load cell
• Advanced digital filters (configurable)
• Setup via dip switches
• Input: Coaxial connector for 1 digital load cell and power supply 24Vdc, 1A
• Output: RS485 (Customized protocols available)
• Application software can be made by request

Options:

• Prepared for panel mounting on DIN rail
• Customized application software
• Mounted in stainless steel housing
• OEM version

ATEX certified (zone 1, 2, 21, 22) RS485 interface module. For directly interfacing up to four digital ATEX load cells via RS485. The interface module type 4X40A can also be used in non-ATEX installations. 

Type: 4X40A

Interface: RS485

Special features:

• RS485 output
• Made in Denmark
• Weighing module for up to 4 digital load cells
• For ATEX and non-ATEX applications
• Plug-and-play installation with Eilersen digital load cells
• Advanced digital filters (configurable)
• Small Form Factor
• A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
• Setup via dip switches
• Application software can be made by request
• For ATEX when supplied by power supply type 4051A
• The power supply 4051A and module type 4X40A must be installed outside the hazardous zone

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

Serial interface module. For interfacing up to eight digital non-ATEX load cells via RS232, RS485 or RS422 (Optional Modbus ASCII/RTU protocol). 

Type: MCE2040

Interface: RS232/RS422/485 (Modbus ASCII/RTU)

Special features:

• Serial RS232/RS485/RS422 communication module for interfacing Eilersen digital load cells to PCs, PLCs and other equipment
• Made in Denmark
• The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell
• The module offers plug-and-play installation with Eilersen pre-calibrated digital load cells
• Optional Modbus ASCII/RTU protocol
• Application software can be made by request

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

ATEX certified (zone 1, 2, 21, 22) DeviceNet interface module. For directly interfacing up to four digital ATEX load cells via DeviceNet. The interface module type 4X37A can also be used in non-ATEX installations. 

Type: 4X37A

Interface: DeviceNet

Special features:

• DeviceNet output
• Made in Denmark
• Weighing module for up to 4 digital load cells
• For ATEX and non-ATEX applications
• Plug-and-play installation with Eilersen digital load cells
• Advanced digital filters (configurable)
• A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
• Setup via dip switches
• Small Form Factor
• For ATEX when supplied by power supply type 4051A
• The power supply 4051A and module type 4X37A must be installed outside the hazardous zone
• Application software can be made by request

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

ODVA approved DeviceNet interface module. For interfacing up to eight digital non-ATEX load cells via DeviceNet.

Type: MCE9637

Interface: DeviceNet

Special features:

• DeviceNet communication module for interfacing Eilersen digital load cells to a DeviceNet Master device (PLC)
• Made in Denmark
• The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell
• Application software can be made by request
• The module offers plug-and-play installation with Eilersen pre-calibrated digital load cells and the module is supplied with an EDS file for easy installation

Options:

• Mounted in stainless steel housing
• Prepared for panel mounting on DIN rail
• Customized application software
• OEM version

Analog output module. Featuring a small LED display, 4-20mA or 0-10Vdc active output and RS485 interface. The module also features four I/O for level alarms and remote tarering. This module can directly connect to up to four digital ATEX load cells for use in non-ATEX installations. 

Type: 4X29

Interface: Analog output (4-20mA or 0-10Vdc active output) and RS485 interface

Special features:

• Analog 4-20mA or 0-10Vdc ACTIVE output
• Made in Denmark
• Digital RS485 serial communication
• Six character LED display
• 2 digital inputs + 2 digital outputs
• Weighing module for up to 4 digital load cells
• Shows the weight on each of the connected load cells
• Shows the summed weight for the connected load cells
• Configurable measuring time (40ms -> 4sec)
• 16bit D/A converter
• 3 different FIR filters selectable by dip switches
• Plug-and-play installation with Eilersen digital load cells
• Input for zero and tare
• Application specific software can be made by request
• A "Digital Junction Box" that can be mounted near the load cells or in a central panel

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

Analog output module. Featuring a small LED display, 4-20mA or 0-10Vdc active output and RS485 interface. The module also features four I/O for level alarms and remote tarering. This module can be used for up to eight digital non-ATEX load cells. The module type MCE2029 can also be used in ATEX applications when connected to an ATEX 4X40A interface module. 

Type: MCE2029

Interface: Analog output (4-20mA or 0-10Vdc active output) and RS485 interface

Special features:

• Analog 4-20mA or 0-10Vdc ACTIVE output
• Made in Denmark
• Digital RS485 serial communication
• Six character LED display
• 2 digital inputs + 2 digital outputs
• Can be used for up to 8 digital load cells
• Shows the weight on each of the load cells
• Shows the summed weight for all the load cells
• Configurable measuring time (40 ms -> 4 seconds)
• 16bit D/A converter
• 3 different FIR filters selectable by dip switches
• Plug-and-play installation with pre-calibrated digital load cells
• Input for zero and tare
• Application software can be made by request
• Setup via keys and dip switches

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

ATEX certified (zone 1, 2, 21, 22) Profibus DP interface module. For directly interfacing up to four digital ATEX load cells via Profibus DP. The interface module type 4X35A can also be used in non-ATEX installations.

Type: 4X35A

Interface: Profibus DP

Special features:

• Profibus DP output
• Made in Denmark
• Weighing module for up to 4 digital load cells
• For ATEX and non-ATEX applications
• Plug-and-play installation with Eilersen digital load cells
• Advanced digital filters (configurable)
• A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
• Small Form Factor
• Setup via dip switches
• For ATEX when supplied by power supply type 4051A
• Application software can be made by request
• The power supply 4051A and module type 4X35A must be installed outside the hazardous zone

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

Profibus DP interface module. For interfacing up to eight digital non-ATEX load cells via Profibus DP. 

Type: MCE2035

Interface: Profibus DP

Special features:

• Profibus DP communication module for interfacing Eilersen digital load cells to a Profibus DP Master device (PLC)
• The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell
• The module offers plug-and-play installation with Eilersen pre-calibrated digital load cells and the module is supplied with a GSD file for easy installation
• Application software can be made by request
• Made in Denmark

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version