
Marike
Load Cell Module MCE2010
The load cell module type MCE2010 interfaces digital non-ATEX load cells to Eilersen weighing terminals and interface modules for communication to PLCs, PCs etc . The module MCE2010 replaces module MCE9610.
Type: MCE2010
Interface: Eilersen RS485 load cell bus
Special features:
- The Digital Load Cell Module MCE2010 interfaces the digital load cells to the Eilersen instrumentation, communication modules and other equipment with fast RS485 communication ports through the Eilersen load cell bus
- The Eilersen proprietary RS485 protocol is available for OEM use
- The connection between the digital load cell and the load cell module is a standard BNC connector
- The load cell module is powered through the digital load cell bus ribbon cable which is terminated in the MCE9601 terminal module
- Up to 16 load cells modules or other modules can be connected to the Eilersen digital RS485 load cell bus
- Made in Denmark
Options:
- Mounted in stainless steel housing
- Prepared for panel mounting on DIN rail
- Customized application software
- OEM version
Compression Load Cell-GDS500
Robust digital heavy duty compression load cell produced in stainless steel and hermetically sealed to IP68. For example for installation under large silos, tanks, vessels and heavy duty applications.
Type: GD S500
Capacity (Emax): 200, 300, 400, 500 tons
Accuracy: Industrial 0.25%
Overload tolerance: Up to 300% of rated capacity
Special features:
- Robust capacitive technology
- Made in Denmark
- Patented high reliability capacitive sensor
- High tolerance of up to 400% overload
- Stainless steel
- Hermetically sealed to IP69K
- Laser welded
- Withstands welding voltages and ESD
- Capacity (Emax): 200, 300, 400, 500tons
- Accuracy: Industrial 0.25%
- Cable length up to 100meters
- Load cell cable replaceable
- Pre-calibrated with signal in kg or kN
- Easy mechanical and electrical installation
- Calibration independent of cable length
Options:
- Load cell cable length 10, 20, 50 or 100meters
- Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)
- Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
- Customized versions available
Click here for examples of GDS Digital Compression Load Cells
Compression Load Cell-GDS100
Robust digital heavy duty compression load cell produced in stainless steel and hermetically sealed to IP68. For example for installation under large silos, tanks, vessels and heavy duty applications.
Type: GDS 100
Capacity (Emax): 100 tons
Accuracy: Industrial 0.25%
Overload tolerance: Up to 300% of rated capacity
Special features:
- Robust capacitive technology
- Made in Denmark
- Patented high reliability capacitive sensor
- High tolerance of up to 400% overload
- Stainless steel
- Hermetically sealed to IP69K
- Laser welded
- Withstands welding voltages and ESD
- Capacity (Emax): 100tons
- Accuracy: Industrial 0.25%
- Cable length up to 100meters
- Load cell cable replaceable
- Pre-calibrated with signal in kg or kN
- Easy mechanical and electrical installation
- Calibration independent of cable length
Options:
- Load cell cable length 10, 20, 50 or 100meters
- Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)
- Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
- Customized versions available
Click here for examples of GDS Digital Compression Load Cells
Sap-concentraat snel verladen? Zet HYGHSPIN schroefspindelpompen in!
De meeste vruchtensappen in de supermarkt zijn gemaakt uit geconcentreerd vruchtensap. HYGHSPIN schroefspindelpompen van Jung Process Systems zijn betrokken bij dit proces van sinaasappel tot sap.
Sapconcentraat ontstaat door het sap uit vruchten te persen. Vezels, schillen en pitjes worden daarbij geheel of gedeeltelijk verwijderd. Een deel van het water is uit het product verwijderd voor transport: wat overblijft is het concentraat. Dit proces vindt plaats in de landen waar de vruchten groeien, zoals in Brazilië. Na concentratie worden de sappen per schip (tanker) vervoerd naar Europa. Daar worden ze gebotteld voor verkoop aan de consument.
De tankers zijn uitgerust met koeltanks met een inhoud van meer dan 10 miljoen liter. Het beladen en ontladen van deze tankers moet in een rap tempo gebeuren. Het hoogviskeuze FCOJ (Frozen Concentrated Orange Juice) moet met grote capaciteit verpompt worden. Voor een van de grootste citrusvruchtenverwerkers ter wereld wordt dit door zes HYGHSPIN 125 schroefspindelpompen gedaan. Dit zijn de grootste pompen in hun soort. Deze hygiënische pomp heeft zich bij soortgelijke toepassingen al bewezen. De pompen leveren op het schip een capaciteit van 85 m3 per uur, waar ze afhankelijk van de viscositeit 300 m3 per uur kunnen leveren. Die beperking is noodzakelijk omdat de werkdruk in het systeem niet hoger mag oplopen dan 12 bar. Desondanks worden de schepen binnen enkele uren volledig gelost.
Voor meer informatie over hygiënische HYGHSPIN schroefspindelpompen op onze website, klikt u hier.
Hoogviskeuze producten verpompen? Koud kunstje voor de HYGHSPIN hopper inlet schroefspindelpomp!
De HYGHSPIN hopper inlet schroefspindelpomp is EHEDG-gecertificeerd en ideaal voor het verpompen van hoogviskeuze producten. U kunt hierbij denken aan diverse soorten saus, (tomaten)pasta, fondant, vleesbrei, deeg, pindasaus, spijs en taartvulling.
Producten met vaste delen kunnen ook perfect met de hopper-uitvoering verpompt worden. De verlengde schroeven verpompen de vaste delen direct. Het voorkomt, bij dun vloeibare producten, dat delen voor de schroefspindels blijven liggen en dus niet verpompt worden. Zo wordt beschadiging van uw product voorkomen.
Tevens wordt ontvochtiging, van bijvoorbeeld spinazie, voorkomen.
Wilt u meer details en/of technische gegevens over de HYGHSPIN hopper inlet, dan kunt u hier klikken. Op de video kunt u zien hoe de hopper deeg verpompt.
Heeft u vragen? Neem contact met ons op!
Klik hier om naar het HYGHSPIN schroefspindelpompen menu op onze website te gaan.
Ingrediënten hygiënisch mixen en natmalen
Tomatenpasta wordt geproduceerd als ingrediënt voor in diverse producten. Denk hierbij aan bijvoorbeeld ketchup, pizzasaus, pastasaus, soep, dressings, dranken, barbecuesaus en salsa. Tijdens het productieproces gaat nog vaak veel product verloren omdat tijdens het zeven waardevolle ingrediënten in de zeef achterblijven.
(Verschenen in Fluids Processing nr 2, april 2014.)
De Boston Shearmill van Admix kan worden ingezet om dit verlies te reduceren. De Shearmill verkleint de waardevolle deeltjes dusdanig dat ze weer aan het product toegevoegd kunnen worden. Tevens geeft dit de klant 3 tot 5% meer opbrengst, wordt het afval met zo'n 25% gereduceerd en is het eindproduct hoogwaardiger.
Voor de verwerkers van tomatenpasta kunnen de kwalitatief verschillende pasta's die ze aangeleverd krijgen, gestandaardiseerd worden tot het gewenste drogestofgehalte. Dit kan met het gebruik van de Rotosolver, Admixer of Boston Shearmill van Admix (zie foto's hieronder).
Wilt u het artikel lezen, open dan de bijlage onder de foto.
Mixen van vloeistoffen en/of poeders in vloeistoffen
In Fluids Processing nr 1 (2014) staat de Rotosolver van Admix op de voorpagina. In het bijbehorende artikel in deze uitgave wordt verteld hoe Admix en Delta-P klanten kunnen helpen met het optimaliseren van productieprocessen. Dat kan door middel van de aanwezige expertise en faciliteiten.
Bedrijven die te maken hebben met vloeistofstromen in hun productieproces hebben veelal ook te maken met mix- of natmaalprocessen. Het mixen van vloeistoffen en/of het mixen van poeders in vloeistoffen vormt vaak een uitdaging. Klont- en schuimvorming, verstopping van filters en warmtewisselaars, geen stabiele emulsie, niet snel of goed poeders kunnen intrekken. Door de diversiteit van ingrediënten vergt het expertise om tot het gewenste resultaat te komen. Admix en Delta-P kunnen u met hun expertise helpen bij uw mix-proces.
Wilt u het artikel lezen, open dan de bijlage onder de foto.
Single Point Load Cell-SPSX
The robust digital single point load cell type SPSX in stainless steel is hermetically sealed to IP69K. The main applications are graders, multihead weighers, checkweighers, filling machines, belt scales, platform scales, bench scales etc. ATEX (Ex) approved versions are available.
Type: SP SX
Capacity (Emax): 5, 10, 20, 50, 100, 150kg
Accuracy: Industrial 0.025%, Precision 0.015%, High Precision 0.010%
Overload tolerance: Up to 1000% of rated capacity
Special features:
- Stainless steel
- Made in Denmark
- Robust capacitive technology
- High tolerance of up to 1.000% overload
- ATEX version available (Zone 1, 2, 21, 22)
- High accuracy, High resolution
- Platform size up to 400 x 400mm
- Hermetically sealed to IP68
- Can be supplied with Mud resistant and
- Laser welded
- Halogen free cables for offshore installation
- Capacity (Emax): 5, 10, 15, 20, 30, 50, 100, 150, 200kg
- Accuracy: Industrial 0.025% Precision 0.015% High Precision 0.010%
- Small deflection at rated capacity
- High resonance frequency (spring rate) for rapid dynamic weighing
- Easy mechanical and electrical installation
- Load cell cable replaceable
- Digital filters
Options:
- ATEX (Zone 1, 2, 21, 22) version type SP5075A
- ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iaD 21 T85°C
- Customized versions available
- Load cell cable length 10, 20, 50 or 100meters
- Mud resistant and Halogen free cables for offshore installation
- Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
- Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)
Click here for examples of SPSX Single Point Load Cells
Single Point Load Cell-SPSXL
The robust digital single point load cell type SPSXL in stainless steel is hermetically sealed to IP69K. The main applications are graders, checkweighers, filling and dosing equipment, belt scales, platform scales, bench scales etc. ATEX (Ex) approved versions are available.
Type: SP SXL
Capacity (Emax): 20, 50, 100, 150 kg
Accuracy: Industrial 0.025%, Precision 0.015%
Overload tolerance: Up to 1000% of rated capacity
Special features:
- Stainless steel
- Made in Denmark
- Robust capacitive technology
- High tolerance of up to 1.000% overload
- High accuracy, High resolution
- Platform size up to 1200 x 600mm
- Can be supplied with Mud resistant and Halogen free cables for offshore installation
- Laser welded
- Hermetically sealed to IP68
- Capacity (Emax): 20, 50, 100, 150, 200, 250kg
- Accuracy: Industrial 0.025% Precision 0.015%
- Small deflection at rated capacity
- High resonance frequency (spring rate) for rapid dynamic weighing
- Load cell cable replaceable
- Easy mechanical and electrical installation
- Digital filters
Options:
- Customized versions available
- Load cell cable length 10, 20, 50 or 100meters
- Mud resistant and Halogen free cables for offshore installation
- Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)
- Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
Heavy Duty Beam Load Cell-SDM80
Robust digital heavy duty beam load cell produced in stainless steel and hermetically sealed to IP68. For example for process weighing, industrial weighing and tough applications such as on-board truck weighing, offshore, steel industry etc. OIML certified (up to C5) according to R60.
Type: SDM 80
Capacity (Emax): 5000, 6000, 7000 kg
Accuracy: Industrial 0.10% up to OIML class C5
Overload tolerance: Up to 1000% of rated capacity
Special features:
- Stainless steel
- Made in Denmark
- Robust capacitive technology
- Patented high reliability capacitive sensor
- OIML R60 accuracy classes up to C5
- High tolerance of up to 1.000% overload
- Hermetically sealed to IP68
- Laser welded
- High accuracy, High resolution
- Digital filters
- Capacity (Emax): 5000, 6000, 7000kg
- Accuracy: Industrial 0.10% up to OIML class C5
- Cable length up to 100meters
- Calibration independent of cable length
- Load cell cable replaceable
- Withstands welding voltages and ESD
- Easy mechanical and electrical installation
Options:
- Mounting kits available
- Customized versions available
- Load cell cable length 10, 20, 50 or 100meters
- Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)
- Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
Click here for examples of SDM80 Digital Beam Load Cells