Eilersen has developed a range of robust floor and pit scales. It features a hinged gas lift load plate for easy washdown in hygienic applications. Scales integrated in the production process have to meet the requirements to hygiene. But also being so robust that a forklift can drive into or over the scale without damaging the load cells. Furthermore the scale must be very safe and easy to clean. The new range of hygienic and robust IP68 rated scales from Eilersen fulfills these requirements.

Type: Hygienic Scale

Capacity (Emax): Up to 5000 kg

Overload tolerance: Up to 300%

Options:

• Certified versions for legal for trade
• Specific dimensions, range and materials
• Local indicator and/or direct interface to PC, PLC or SCADA systems

Special features:

• Hinged gas lift load plate for or easy washdown in hygienic applications
• Dimensions, range and materials (e.g. AISI304 or 316, epoxy coating etc.) according to customer specifications
• Made in Denmark
• Robust capacitive technology
• Patented high reliability capacitive sensor (IP68)
• High tolerance of up to 1000% overload
• High accuracy and high resolution
• Digital filters for reducing the influence from vibrations
• Scale calibration is independent of cable length
• Cable length up to 100meters
• A range of software modules for standard weighing, special purposes, and customer specific applications
• The status of each load cell in the scale can be monitored allowing for easy maintenance
• Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface

Click here for examples of Hygienic Scales

Eilersen reliable floor and pit scales are used in wet and tough environments. There are overloads, vibrations, high humidity and corrosion and high accuracies are required. The scales are maintenance-free and fulfil the protection degree IP68.

Type: Floor Scale

Capacity (Emax): Up to 5000 kg

Overload tolerance: Up to 1000%

Options: 

• Certified versions for legal for trade
• Specific dimensions, range and materials
• Local indicator and/or direct interface to PC, PLC or SCADA systems

Special features:

• Dimensions, range and materials (e.g. AISI304 or 316, epoxy coating etc.) according to customer specifications
• Robust capacitive technology
• Made in Denmark
• Patented high reliability capacitive sensor (IP68)
• High tolerance of up to 1000% overload
• High accuracy and high resolution
• Digital filters for reducing the influence from vibrations
• Scale calibration is independent of cable length
• Cable length up to 100meters
• A range of software modules for standard weighing, special purposes, and customer specific applications
• The status of each load cell in the scale can be monitored allowing for easy maintenance
• Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface

Click here for examples of Floor Scales

Eilersen bench scales are used in tough environments. There are overloads, vibrations, high humidity and corrosion and high accuracies are required. The bench scales are maintenance-free and fulfil the protection degree IP68. Eilersen bench scales are also available with automatic compensation for seaway.

Type: Bench Scale

Capacity (Emax): Up to 500 kg

Overload tolerance: Up to 1000%

Options:

• Specific dimensions, range and materials
• Local indicator and/or direct interface to PC, PLC or SCADA systems
• Certified versions for legal for trade
• Compensation for seaway

Special features:

• Accuracy Dimensions, range and materials (e.g. AISI304 or 316, epoxy coating etc.) according to customer specifications
• Robust capacitive technology
• Made in Denmark
• Patented high reliability capacitive sensor (IP68)
• High tolerance of up to 1000% overload
• High accuracy and high resolution
• Digital filters for reducing the influence from vibrations
• Scale calibration is independent of cable length
• Cable length up to 100meters
• A range of software modules for standard weighing, special purposes, and customer specific applications
• The status of each load cell in the scale can be monitored allowing for easy maintenance
• Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface
• Eilersen bench scales are also available with automatic compensation for seaway

Click here for examples of Bench Scales

ATEX scales based on Eilersen robust IP68 load cells for installation in ATEX rated area (zone 1, 2, 21, and 22). They are typically used in food, pharma, chemical and offshore applications where reliability is a must.

Type: ATEX Scale

Capacity (Emax): Up to 20000 kg

Overload tolerance: Up to 1000%

Options:

• Specific dimensions, range and materials
• Local indicator and/or direct interface to PC, PLC or SCADA systems

Special features:

• Installation in ATEX zone 1, 2, 21, and 22
• Dimensions, range and materials (e.g. AISI304 or 316, epoxy coating etc.) according to customer specifications
• Made in Denmark
• Robust capacitive technology
• Patented high reliability capacitive sensor (IP68)
• High tolerance of up to 1000% overload
• High accuracy and high resolution
• Digital filters for reducing the influence from vibrations
• Scale calibration is independent of cable length
• Cable length up to 100meters
• A range of software modules for standard weighing, special purposes, and customer specific applications
• The status of each load cell in the scale can be monitored allowing for easy maintenance
• Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface

Click here for examples of ATEX Scales

Flexible and fully digital OIML certified weighing terminal type MCE9625L with numeric keyboard and a wide range of software for all standard weighing applications. The MCE9625L weighing terminal feature a digital signal processor and advanced features for displaying and controlling process values and communication with various types of equipment.

Type: MCE9625L

Options: 

• OEM version
• Panel mounting
• Customized application software
• Mounted in stainless steel housing

Special features:

• 2 x RS485, 1 x RS485/422, 2 x RS232 serial interfaces
• 3 x 24Vdc inputs and 3 x 24Vdc outputs
• Made in Denmark
• 7-segment LEDs for displaying data and parameters
• 7 x LEDs for signalling: Zero valid, In on/off, Out on/off
• Numeric keyboard with keys for zeroing, tare function, gross/net and entering parameters, set-points etc.
• Function keys for Start/Stop and Print for handling various processes
• Ten function keys for entering and controlling parameters
• Connection to Fieldbus and supervisory (ERP) systems
• Optional extra LEDs for signalling in OEM applications
• Optional I/O extension: 4 x 24Vdc digital inputs and 8 x 24Vdc, 0.1A digital outputs for connection to photo cells, relays, actuators etc.
• Optional Profibus DP, DeviceNet, EtherCAT, and ProfiNet (pending) interfaces

Applications:

• Filling & Dispensing of liquid or bulk material
• Dosing of liquid or bulk material
• Scales
• Flow
• Mixing
• Mobile weighing
• Batching with recipe handling
• Loss-in-Weight
• Customer specific application software
• Force measurement
• Level-by-weight
• Vessel weighing
• Checkweighing
• Belt Scales

Click here for examples of the 9625L Digital LED Weighing Terminal 

Very flexible and fully digital OIML certified weighing terminal type MCE9625G with alphanumeric keyboard and a wide range of software for all standard weighing applications. The Eilersen weighing terminals feature a digital signal processor for displaying and processing the data from the Eilersen range of digital load cells. The MCE9625G is a weighing terminal with internal recipe handling to allow automation of batching and manual additions. The weighing terminal features various batch functions for direct control of batch components.

Type: MCE9625G

Options:

• OEM version
• Panel mounting
• Customized application software
• Mounted in stainless steel housing

Special features:

• 2 x RS485, 1 x RS485/422, 2 x RS232 serial interfaces
• 3 x 24Vdc inputs and 3 x 24Vdc outputs
• Made in Denmark
• 256 x 64pixel (40 x 8 characters) graphic LCD display with LED backlight for displaying data and parameters plus specific functions for the ten function keys, help screens etc.
• Alphanumeric keyboard with keys for zeroing, tare function, gross/net and entering parameters, set-points, etc.
• Function keys for Start/Stop and Print for handling various processes
• Ten function keys for entering and controlling parameters
• Connection to Fieldbus and supervisory (ERP) systems
• Optional I/O extension: 4 x 24Vdc digital inputs and 8 x 24Vdc, 0.1A digital outputs for connection to photo cells, relays, actuators etc.
• Optional Profibus DP, DeviceNet, EtherCAT, and ProfiNet (pending) interfaces

Applications:

• Filling & Dispensing of liquid or bulk material
• Dosing of liquid or bulk material
• Scales
• Mixing
• Flow
• Mobile weighing
• Batching with recipe handling
• Loss-in-Weight
• Customer specific application software
• Force measurement
• Level-by-weight
• Vessel weighing
• Checkweighing
• Belt Scales 

Fully digital OIML certified weighing terminal type 5024G. With alibi memory and software for standard weighing applications. Digital signal processor for displaying and processing the data from the Eilersen range of digital load cells. Durable capacitive touch keyboard.

Type: 5024G

Options:

• OEM version
• Panel mounting
• Customized application software
• Mounted in stainless steel housing

Special features:

• 5,2" LCD for displaying data and parameters
• Touch keyboard with 7 keys for zeroing, tare function, entering parameters, set-points, etc.
• Alibi memory
• Made in Denmark
• Ethernet, RS485, and 4-20mA ACTIVE output for communication with PCs, PLCs, central data processing systems, printers, bar code readers, etc.
• 4 configurable 24Vdc I/O
• Function keys for Start/Stop and Print for handling various processes
• Durable front with no keyboard to be worn out
• Optional Profibus DP, DeviceNet, EtherCAT, and ProfiNet (pending) interfaces

Applications:

• Filling & Dispensing of liquid or bulk material
• Dosing of liquid or bulk material
• Mobile weighing
• Checkweighing
• Scales
• Force measurement
• Level-by-weight
• Vessel weighing
• Customer specific application software

Click here for examples of the 5024G Digital LCD Weighing Terminal

ATEX certified (zone 1, 2, 21, 22) power supply type 4051A. Used for supplying 4XXXA interface modules when used in ATEX rated applications. The 4051A power supply and 4XXXA interface module must be installed in safe area i.e. outside the ATEX zone. 

Type: 4051A

Interface: ATEX power supply

Special features:

• ATEX certified power supply for Eilersen digital weighing modules type 4XXXA
• Made in Denmark
• For hazardous applications in ATEX Zone 1, 2, 21 or 22
• The power supply type 4051A and module type 4XXA must be installed outside the hazardous zone
• Small Form Factor
• Output: Safe 24 Vdc, 0.2A output
• Input: Standard power supply 24 Vdc, 1A

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• OEM version

Connection between Eilersen RS485 load cell bus at one side and 24Vdc Power Supply and Eilersen digital weighing terminals on the other side.

Type: MCE9601

Interface: 24Vdc supply and Eilersen RS485 load cell bus

Special features:

• Connection between Eilersen Electric Digital Load Cell bus at one side and 24 VDC Power Supply and Eilersen digital weighing terminals on the other side
• Made in Denmark

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• OEM version

ATEX certified (zone 1, 2, 21, 22) EtherNet/IP interface module. For directly interfacing up to four digital ATEX load cells via EtherNet/IP. The interface module type 4X50A can also be used in non-ATEX installations. 

Type: 4X50A

Interface: EtherNet/IP

Special features:

• EtherNet/IP output
• Made in Denmark
• Weighing module for up to 4 digital load cells
• For ATEX and non-ATEX applications
• Plug-and-play installation with Eilersen digital load cells
• Advanced digital filters (configurable)
• A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
• Small Form Factor
• Setup via dip switches
• For ATEX when supplied by power supply type 4051A
• Application software can be made by request
• The power supply 4051A and module type 4X50A must be installed outside the hazardous zone

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version