Toon items op tag: ATEX

OEM weighing board for interfacing up to 8 digital load cells to PLCs, PCs etc. This weighing board is developed for OEM use. It can be equipped with customized protocols.

Type: 5008OEM

Interface: RS485, EtherNet, EtherCAT (pending)

Special features:

• Interfaces: RS485, EtherNet and EtherCAT (pending)
• Made in Denmark
• Weighing board for up to 8 digital load cells
• Plug-and-play installation with pre-calibrated digital load cells
• Advanced digital filters (configurable)
• Setup via dip switches
• Connectors for up to 8 digital load cells and power supply 24Vdc, min. 2A
• Application software can be made by request

Options:

• Weighing board for up to 16 digital load cells
• Prepared for panel mounting
• Mounted in stainless steel housing
• Customized application software
• OEM version

ATEX certified (zone 1, 2, 21, 22) power supply type 4051A. Used for supplying 4XXXA interface modules when used in ATEX rated applications. The 4051A power supply and 4XXXA interface module must be installed in safe area i.e. outside the ATEX zone. 

Type: 4051A

Interface: ATEX power supply

Special features:

• ATEX certified power supply for Eilersen digital weighing modules type 4XXXA
• Made in Denmark
• For hazardous applications in ATEX Zone 1, 2, 21 or 22
• The power supply type 4051A and module type 4XXA must be installed outside the hazardous zone
• Small Form Factor
• Output: Safe 24 Vdc, 0.2A output
• Input: Standard power supply 24 Vdc, 1A

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• OEM version

ATEX certified (zone 1, 2, 21, 22) EtherNet/IP interface module. For directly interfacing up to four digital ATEX load cells via EtherNet/IP. The interface module type 4X50A can also be used in non-ATEX installations. 

Type: 4X50A

Interface: EtherNet/IP

Special features:

• EtherNet/IP output
• Made in Denmark
• Weighing module for up to 4 digital load cells
• For ATEX and non-ATEX applications
• Plug-and-play installation with Eilersen digital load cells
• Advanced digital filters (configurable)
• A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
• Small Form Factor
• Setup via dip switches
• For ATEX when supplied by power supply type 4051A
• Application software can be made by request
• The power supply 4051A and module type 4X50A must be installed outside the hazardous zone

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

ATEX certified (zone 1, 2, 21, 22) RS485 interface module. For directly interfacing up to four digital ATEX load cells via RS485. The interface module type 4X40A can also be used in non-ATEX installations. 

Type: 4X40A

Interface: RS485

Special features:

• RS485 output
• Made in Denmark
• Weighing module for up to 4 digital load cells
• For ATEX and non-ATEX applications
• Plug-and-play installation with Eilersen digital load cells
• Advanced digital filters (configurable)
• Small Form Factor
• A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
• Setup via dip switches
• Application software can be made by request
• For ATEX when supplied by power supply type 4051A
• The power supply 4051A and module type 4X40A must be installed outside the hazardous zone

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

ATEX certified (zone 1, 2, 21, 22) DeviceNet interface module. For directly interfacing up to four digital ATEX load cells via DeviceNet. The interface module type 4X37A can also be used in non-ATEX installations. 

Type: 4X37A

Interface: DeviceNet

Special features:

• DeviceNet output
• Made in Denmark
• Weighing module for up to 4 digital load cells
• For ATEX and non-ATEX applications
• Plug-and-play installation with Eilersen digital load cells
• Advanced digital filters (configurable)
• A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
• Setup via dip switches
• Small Form Factor
• For ATEX when supplied by power supply type 4051A
• The power supply 4051A and module type 4X37A must be installed outside the hazardous zone
• Application software can be made by request

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

Analog output module. Featuring a small LED display, 4-20mA or 0-10Vdc active output and RS485 interface. The module also features four I/O for level alarms and remote tarering. This module can directly connect to up to four digital ATEX load cells for use in non-ATEX installations. 

Type: 4X29

Interface: Analog output (4-20mA or 0-10Vdc active output) and RS485 interface

Special features:

• Analog 4-20mA or 0-10Vdc ACTIVE output
• Made in Denmark
• Digital RS485 serial communication
• Six character LED display
• 2 digital inputs + 2 digital outputs
• Weighing module for up to 4 digital load cells
• Shows the weight on each of the connected load cells
• Shows the summed weight for the connected load cells
• Configurable measuring time (40ms -> 4sec)
• 16bit D/A converter
• 3 different FIR filters selectable by dip switches
• Plug-and-play installation with Eilersen digital load cells
• Input for zero and tare
• Application specific software can be made by request
• A "Digital Junction Box" that can be mounted near the load cells or in a central panel

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

Analog output module. Featuring a small LED display, 4-20mA or 0-10Vdc active output and RS485 interface. The module also features four I/O for level alarms and remote tarering. This module can be used for up to eight digital non-ATEX load cells. The module type MCE2029 can also be used in ATEX applications when connected to an ATEX 4X40A interface module. 

Type: MCE2029

Interface: Analog output (4-20mA or 0-10Vdc active output) and RS485 interface

Special features:

• Analog 4-20mA or 0-10Vdc ACTIVE output
• Made in Denmark
• Digital RS485 serial communication
• Six character LED display
• 2 digital inputs + 2 digital outputs
• Can be used for up to 8 digital load cells
• Shows the weight on each of the load cells
• Shows the summed weight for all the load cells
• Configurable measuring time (40 ms -> 4 seconds)
• 16bit D/A converter
• 3 different FIR filters selectable by dip switches
• Plug-and-play installation with pre-calibrated digital load cells
• Input for zero and tare
• Application software can be made by request
• Setup via keys and dip switches

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

ATEX certified (zone 1, 2, 21, 22) Profibus DP interface module. For directly interfacing up to four digital ATEX load cells via Profibus DP. The interface module type 4X35A can also be used in non-ATEX installations.

Type: 4X35A

Interface: Profibus DP

Special features:

• Profibus DP output
• Made in Denmark
• Weighing module for up to 4 digital load cells
• For ATEX and non-ATEX applications
• Plug-and-play installation with Eilersen digital load cells
• Advanced digital filters (configurable)
• A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
• Small Form Factor
• Setup via dip switches
• For ATEX when supplied by power supply type 4051A
• Application software can be made by request
• The power supply 4051A and module type 4X35A must be installed outside the hazardous zone

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version